 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation (http://www.renesas.com) send any inquiries to http://www.renesas.com/inquiry.
notice 1. all information included in this document is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas el ectronics products li sted herein, please confirm the latest product information with a renesas electronics sales office. also , please pay regular and careful attention to additional and different information to be disclosed by rene sas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringeme nt of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electroni cs products or techni cal information descri bed in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyri ghts or other intell ectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any re nesas electronics product, wh ether in whole or in part . 4. descriptions of circuits, software and other related informat ion in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully re sponsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this doc ument, you should comply with the applicable export control laws and regulations and follow the proc edures required by such laws and re gulations. you should not use renesas electronics products or the technology described in this docum ent for any purpose relating to mil itary applicati ons or use by the military, including but not l imited to the development of weapons of mass de struction. renesas electronics products and technology may not be used for or incor porated into any products or systems whose manufacture, us e, or sale is prohibited under any applicable dom estic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing th e information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 7. renesas electronics products ar e classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product de pends on the product?s quality grade, as indicated below. you must check the qua lity grade of each renesas electronics pr oduct before using it in a particular application. you may not use any renesas electronics produc t for any application categorized as ?speci fic? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. re nesas electronics shall not be in any way liable for any damages or losses incurred by you or third partie s arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intende d where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electr onics data sheets or data books, etc. ?standard?: computers; office equipmen t; communications e quipment; test and measurement equipment; audio and visual equipment; home electronic a ppliances; machine tools; personal electronic equipmen t; and industrial robots. ?high quality?: transportation equi pment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specif ically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support device s or systems), surgical im plantations, or healthcare intervention (e.g. excision, etc.), and any other applicati ons or purposes that pose a di rect threat to human life. 8. you should use the renesas electronics pr oducts described in this document within the range specified by renesas electronics , especially with respect to the maximum ra ting, operating supply voltage range, movement power volta ge range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its produc ts, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate a nd malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physic al injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safe ty design for hardware and software in cluding but not limited to redundancy, fire control and malfunction prevention, appropri ate treatment for aging degradation or an y other appropriate measures. because the evaluation of microcomputer software alone is very difficult , please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesa s electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regul ate the inclusion or use of c ontrolled substances, including wi thout limitation, the eu rohs directive. renesas electronics assumes no liability for damage s or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any form, in w hole or in part, without prio r written consent of renes as electronics. 12. please contact a renesa s electronics sales office if you have any questi ons regarding the informat ion contained in this document or renesas electroni cs products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics. the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. mos integrated circuit pd166104 dual n-cannel low side intelligent power device document no. s18753ej1v0ds00 (1st edition) date published june 2007 ns printed in japan data sheet 2007 the pd166104 is a high voltage, dual output, and n-cannel low side intelligent power devic e with built-in overheat protection and overcurrent limitat ion circuits. it protects itself by shutti ng down or limiting curr ent when it detects overheat or overcurrent. output mos s hut down is restarted autom atically by cooling of the chip temperature. features ? high voltage dual output low side driver ? built-in overcurrent limitation circ uits and overheat protection circuits - shuts down by overheat detection - restarts automatically after cooling ? built-in dynamic clamping circuit (100 v min.) ? low on-state resistance ? small 20-pin sop package ordering information part number lead plating packing package remark pd166104gs-e1-az sn-bi tape 2500 p/reel 20-pin plastic sop (7.62 mm (300)) lead-free product pd166104gs-e2-az sn-bi tape 2500 p/reel 20-pin plastic sop (7.62 mm (300)) lead-free product quality grade part number quality grade pd166104gs-e1-az special pd166104gs-e2-az special please refer to "quality grades on nec semiconductor devices" (document no. c11531e) published by nec corporation to know the specification of quality grade on the devices and its recommended applications. application ? injector driver data sheet s18753ej1v0ds 2 pd166104 block diagram overheat protection current limitation out1 in1 gnd1 v cc 1 input circuit dynamic clamping circuit output mos (n-ch) ch 1 ch 2 v cc 2 in2 out2 gnd2 pin configuration ? 20-pin plastic sop (7.62 mm (300)) top view out1 in1 n.c. v cc 1 out1 out2 in2 n.c. v cc 2 out2 out2 gnd2 gnd2 gnd2 gnd1 gnd1 gnd1 out2 out1 out1 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 pin name pin no. pin name pin no. pin name pin no. pin name pin no. pin name 1 out1 6 out2 11 out2 16 out1 2 in1 7 in2 12 gnd2 17 gnd1 3 n.c. 8 n.c. 13 gnd2 18 gnd1 4 v cc 1 9 v cc 2 14 gnd2 19 gnd1 5 out1 10 out2 15 out2 20 out1 data sheet s18753ej1v0ds 3 pd166104 absolute maximum ratings parameter symbol condition rating unit input voltage v in ? 1.5 to + 7 v v cc 1 ? 0.5 to + 18 v power supply voltage v cc 2 1 s 35 v output voltage v out except the clamping voltage at the flyback time 100 v output current i o (dc) v in = 5 v, dc self limited a/ch power dissipation p d ta = 25 c, both channels are on note 2.5 w channel temperature tch 150 c storage temperature tstg ? 55 to + 150 c note when mounted on 50 mm x 50 mm x 1.5 mm epoxy pcb fr4 substrate with 600 mm 2 x 70 m copper foil. caution product quality may suffer if the absolute maximum rating is exceeded even momentarily for any parameters. that is, the absolute maximum ratings are rated valu es at which the product is on the verge of suffering physical damage , and therefore the product must be used under conditions that ensure that the absolute m aximum ratings are not exceeded. the ratings and conditions indicated for dc ch aracteristics and ac characteristics represent the quality assurance range dur ing normal operation. data sheet s18753ej1v0ds 4 pd166104 electrical specifications (v cc = 5 to 18 v, tch = ?40 to 150 c, unless otherwise specified) parameter symbol condition min. typ. max. unit high level input voltage v ih rin = 1 k , v ds = 0.3 v, i o = 1.4 a 3.0 v low level input voltage v il rin = 1 k , v ds = 20 v, i o = 1 ma 1.5 v high level input current i ih v in = 5.5 v, v ds = 0 v 300 a low level input current i il v in = 0 v, v ds = 20 v ?10 +10 a i cc 1 v cc = 16 v, on condition 10.0 ma/ch power supply current i cc 2 v cc = 16 v, off condition 10.0 ma/ch r ds (on)1 i o = 1.4 a, tch = 25 c, v in = v ih , v cc = 16 v 64 91 m output on state resistance r ds (on)2 i o = 1.4 a, tch = 150 c, v in = v ih , v cc = 16 v 107 146 m turn on time ton 3.5 35 s rise time tr v in = 0 12 v 8 v in in out gnd pd166104 v cc 1 k in wave form out wave form 90% 50% 90% 10% 50% 10% ton tr toff tf data sheet s18753ej1v0ds 5 pd166104 ? input circuit (on/off control) output mos turns on when the high-level input volt age (3.0 v or more) is applied to in terminal. output mos turns off when the low-level input vo ltage (1.5 v or less) is applied to in terminal. v in v out (resistance load) 5 v gnd v out gnd ?l? ?l? ?l? ?h? ?h? ?h? off off off off on on on ?l? ? dynamic clamp circuit this circuit is for protection of out put and other circuits from the overvo ltage by back electromotive force when inductive load turns off. the clamp diode is connected betw een drain and gate of output. ou tput voltage is clamped by this circuit when the voltage of the out terminal exceeded the out put clamping voltage. 5 v gnd v out gnd v in v out (inductive load) ?l? ?l? ?h? off off on vz ? current limitation circuit this circuit prevents destruction from the overcurrent when the short-circuit occurs. when the overcurrent flows to the out terminal such as short-circuit condition, the output current is limited. power supply voltage to out terminal should be 18 v or less when the short-circuit occurs. ? overheat protection circuit this circuit prevents destruction from overheat. the channel temperature of the output is moni tored and the output is shut down when overheat is detec ted. output restarts automatica lly after the channel cooled down. 5 v gnd ?l? ?l? ?h? v in v out tch t hi v cc data sheet s18753ej1v0ds 6 pd166104 typical characteristics high level input voltage vs. supply voltage high level input voltage vs. ambient temperature low level input voltage vs. supply voltage low level input voltage vs. ambient temperature high level input current vs. supply voltage high level input current vs. ambient temperature 0 50 100 150 200 250 300 0 5 10 15 20 v cc - supply voltage - i ih - high level input current - a 0 50 100 150 200 250 300 ?50 0 50 100 150 200 ta - ambient temperature - c i ih - high level input current - a 1.0 1.5 2.0 2.5 3.0 3.5 0 5 10 15 20 v cc - supply voltage - v il - low level input voltage - v 1.0 1.5 2.0 2.5 3.0 3.5 ?50 0 50 100 150 200 ta - ambient temperature - c v il - low level input voltage - v 1.0 1.5 2.0 2.5 3.0 3.5 ?50 0 50 100 150 200 ta - ambient temperature - c v ih - high level input voltage - v 1.0 1.5 2.0 2.5 3.0 3.5 0 5 10 15 20 v cc - supply voltage - v ih - high level input voltage - v data sheet s18753ej1v0ds 7 pd166104 operating current vs. ambient tenperature output leakage current vs. ambient temperature turn on time vs. ambient temperature turn off time vs. ambient temperature rise time vs. ambient temperature fall time vs. ambient temperature 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 ?50 0 50 100 150 200 ta - ambient temperature - c i cc - operating current - ma i cc 1 i cc 2 0 20 40 60 80 100 120 ?50 0 50 100 150 200 ta - ambient temperature - c i dss - output leakage current - a 0 5 10 15 20 25 ?50 0 50 100 150 200 ta - ambient temperature - c toff - turn off time - s 0 5 10 15 20 25 ?50 0 50 100 150 200 ta - ambient temperature - c ton - turn on time - s 0 5 10 15 20 25 ?50 0 50 100 150 200 ta - ambient temperature - c tr - rise time - s 0 5 10 15 20 25 ?50 0 50 100 150 200 ta - ambient temperature - c tf - fall time - s data sheet s18753ej1v0ds 8 pd166104 on state resistance vs. ambient temperature total power dissipation vs. ambient temperature transient thermal resistance characteristics transient thermal resistance vs. pulse width 0.1 1 10 100 1000 0.001 0.01 0.1 1 10 100 1000 pulse width (s) transient thermal resistance rth (c/w) rth(ch-a) = 62.5 c/w rth(ch-c) = 16.5 c/w device on 50 mm 50 mm 1.5 mm epoxy pcb fr4 with 6 cm 2 of 70 m copper area 0.0 0.5 1.0 1.5 2.0 2.5 0 50 100 150 200 ta - ambient temperature - c p t - total power dissipation - w 2 units 1 unit 0.00 0.02 0.04 0.06 0.08 0.10 0.12 ?50 0 50 100 150 200 r ds (on) - on state resistance - 0.14 ta - ambient temperature - c data sheet s18753ej1v0ds 9 pd166104 application example in2 out2 gnd micro computer gnd power gnd pd166104 vbat in1 out1 injector rin rin v cc in2 out2 gnd power gnd pd166104 in1 out1 rin rin v cc rin: ex. 470 injector injector injector caution this application circuit is example and not intended for use in actual mass production design. data sheet s18753ej1v0ds 10 pd166104 package drawing 110 11 20 s ? 3 item millimeters a b c e f g h j 12.7 0.3 1.27 (t.p.) 1.8 max. 1.55 0.05 7.7 0.3 0.78 max. 0.12 1.1 m 0.1 0.1 n p20gm-50-300b, c-7 p3 + 7 note each lead centerline is located within 0.12 mm of its true position (t.p.) at maximum material condition. d 0.42 + 0.08 ? 0.07 k 0.22 + 0.08 ? 0.07 l 0.6 0.2 0.10 detail of lead end i 5.6 0.2 m p g c b d e f n 20-pin plastic sop (7.62 mm (300)) s m h k l j i a data sheet s18753ej1v0ds 11 pd166104 taping information there are two types (e1, e2) of directi ons of the device in the career tape. pin 1 indicatio n tape drawout direction e1: pin 1 of the device faces toward the open end of the tape, away from the reel e2: pin 1 of the device faces away from the open end of the tape, toward the reel pin 1 indicatio n marking information this figure indicates the marking items and arrangement. ho wever, details of the le tterform, the size and the position aren't indicated. d166104gs country of assembly lead-free mark pin 1 indication lot number data sheet s18753ej1v0ds 12 pd166104 recommended soldering conditions the pd166104 should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recommended below, contact an nec electronics sales representative. for technical information, see the following website. semiconductor device mount manual (http ://www.necel.com/pkg/en/mount/index.html) ? pd166104gs-e1-az: 20-pin plastic sop (7.62 mm (300)) ? pd166104gs-e2-az: 20-pin plastic sop (7.62 mm (300)) soldering method solder ing conditions symbol infrared reflow peak package?s surface temperature: 260 c, reflow time: 60 seconds or less (220 c or higher), maximum allowable number of reflow processes: 3, exposure limit note : 7 days (10 to 72 hours pre-backing is required at 125c afterwards), flux: rosin flux with low chlori ne (0.2 wt% or below) recommended. data sheet s18753ej1v0ds 13 pd166104 [memo] data sheet s18753ej1v0ds 14 pd166104 [memo] data sheet s18753ej1v0ds 15 pd166104 [memo] pd166104 the information in this document is current as of june, 2007. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electroni cs assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific": |
Price & Availability of S18753EJ1V0DS00-15
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |